How to change a scroll saw blade

How to change a scroll saw blade

A scroll saw can perform a versatile operation over wooden projects. It is an interesting tool that needs special care. Those of you who have worked with a saw blade before already know that the saw blade does not last long.
If you are not careful chances are higher that you would break the metal. So, it is quite necessary to learn the right way to change a scroll saw blade.
Obviously, this question How do I change the blade on my scroll saw? would pop in the head.
Without further due, let’s get a complete picture of how to change a scroll saw blade.

how to install plain end scroll saw blades

Things you need:

  • Hand gloves
  • Scroll saw blade
  • Allen Key
  • Screwdriver
  • Step by Step How to Change a Scroll Saw Blade

Step-1: Take cautions

First, get the safety cautions one by one. Wear hand gloves so that you can protect your hands from cutting and scratching. Most importantly, unplug the saw to get rid of electronic connection before even starting the project. This will keep you safe from accidents.

Step-2: Loosen up saw blade screw

How to Replace a Scroll Saw Blade is crucial. Hence, do not misinterpret this with the modern table saw blade system because the processes are different. You can’t change the scrolls saw just with the help of a key unlike modern table saw blade system.

Therefore, to change the saw, you have to loosen screws holding the blade; one at the top and the other at the bottom. Now, locate the screws and untighten them. Use an Allen key or screwdriver to do this.
Note: In some cases, you might need to eradicate the nut to take out the blade. Other than that loosening nuts is enough to bring the blade out.

Step-3 Remove the worn-out Scroll Sawblade.

For most scroll saw blades loosening the screws is enough; the blades will come out but if you find the saw is not doing it then follow this:
Put a slight pressure and take away the blade from the screw in sideways. Lastly, pull it down.
And if the table scroll saw is in your hand then pull the blade to your side to remove it.

Step-4 Install Scroll Saw Blade

Now, all you have to do is to place the new blade upon the blank slot of the saw. To install the blade, perform step-3 backwardly. As you pulled the blade out towards you now push the new blade towards the saw.
However, before you install it, make sure that the blade is a quality product. Because a cheap blade tends to worn out soon; it’s a hassle to change it too often.

Step-5 Tighten the screw.

As you have put on the new blade, tighten the screws to settle it. Most importantly, while tightening it, keep the blade straight. Or else, you will get an unpleasant cut.
Tighten the screws holding the blade in position. Use the same Allen key you have used before in the process.

Step-6 Run the machine

After finishing the screw-tightening, the scroll saw is ready to use. Before you use it on an actual project, try it on something to see if it really works better. To run the test, do as follows:
Plugin the saw scroll into the socket. Now, take a scrap piece of wood and try cutting it with the saw. Check how the scroll saw blade is performing. If it’s not cutting straight or loosened, you have to adjust it once more. On the contrary, if it works, then it is ready to put in action.

Shopsmith scroll saw blade change system.

Shopsmith in Ohio sells multi-function machines, and recently they upgraded their scroll saw ( 2-127) with easy blade changing system. The upgrade kit of model 555706 makes it easier. All you have to do is to disengage and re-engage the blades.

Are scroll saw blades universal?

If your question directs to scroll saw blade sizes, then the answer is yes, it is universal. A 5-inch scroll saw blade is fit to sit in most of the scroll saws available all around the world. However, not all the scroll sows are the same. If you divide it according to the cutting material, you will find two types of scroll saw blades; one stands for cutting metal (Wood blades), and the other is for cutting wood (Metal blades).
Therefore, the plain-end 5-inch blades are universal and work for most saws. The teeth come in the same size.
Conclusion: While changing the scroll saw blade, one must follow the above steps. Nothing beats practising to make the process perfect.
To put it shortly, the process includes unplugging the saw, releasing the blade tension, loosening the blade mounts, removing the old blade, replacing the blade, tightening the blade mounts and re-tensioning the blade.
We hope this article was helpful enough to solve the question of how to change a scroll saw blade?

FAQ:

What is the best scroll saw for beginners?

Dewalt Variable-Speed Scroll Saw from Amazon is a wise pick for overall good performance.
If the preference is budget-friendly, then one may look into Ryobi Corded Scroll Saw from Home Depot.
Damel Moto-Saw from Amazon is most comfortable to use on the other hand.
If the preference is more on a professional level for bulk projects, then Delta Power Tools Scroll Saw from Amazon will suit best.

Why does my scroll saw blade keep breaking?

The probable reasons for breaking the blades too often are most likely to be improper tension or hogging the wood too fast or putting much side pressure.

How do you change the blade on a Craftsman scroll saw?

The process is the same is the method mentioned above.

Is a scroll saw the same as a jigsaw?

You can use both Jigsaw and Scroll saw for making plunge cuts and curved lines. However, the scroll saw is designed for making curved lines while with the jigsaw, you can do other jobs as well.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.